 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NUP4102XV6 6-Pin Bi-Directional Quad TVS Array This 6-Pin bi-directional transient suppressor array is designed for applications requiring transient overvoltage protection capability. It is intended for use in transient voltage and ESD sensitive equipment such as computers, printers, cell phones, medical equipment, and other applications. Its integrated design provides bi-directional protection for four separate lines using a single SOT-563 package. This device is ideal for situations where board space is a premium. Features http://onsemi.com 6 4 2, 5 3 1 * Bi-directional Protection for Four Lines in a * * * * * * * * * Single SOT-563 Package Peak Power Dissipation - 75 W (8x20 msec Waveform) Low Leakage Current (100 nA @ 12 V) Low Capacitance (< 15 pF) Provides ESD Protection for JEDEC Standards JESD22 - Machine Model = Class C - Human Body Model = Class 3B Provides ESD Protection for IEC 61000-4-2, 15 kV (Air), 8 kV (Contact) Void Free, Transfer-Molded, Thermosetting Plastic Case Corrosion Resistant Finish, Easily Solderable Package Designed for Optimal Automated Board Assembly Small Package Size for High Density Applications Mechanical Characteristics SOT-563 CASE 463A PLASTIC MARKING DIAGRAM 654 RP MG G 123 RP = Device Marking M = One Digit Date Code G = Pb-Free Package (Note: Microdot may be in either location) Applications * GSM Handsets and Accessories * Other Telephone Sets * Computers / Printers / Set-Top Boxes MAXIMUM RATINGS (TJ=25C, unless otherwise specified) Rating Peak Power Dissipation 8x20 msec Double Exponential Waveform, (Note 1) Operating Junction Temperature Range Storage Temperature Range Lead Solder Temperature - Maximum (10 sec) Human Body Model ( HBM) Machine Model (MM) IEC 61000-4-2 Air (ESD) IEC 61000-4-2 Contact (ESD) Symbol PPK Value 75 Unit W ORDERING INFORMATION TJ TSTG TL ESD -40 to 125 -55 to 150 260 16 0.4 30 30 C C C kV Device NUP4102XV6T1G Package SOT-563 (Pb-Free) Shipping 4000/Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Non-repetitive current pulse per Figure 3. (c) Semiconductor Components Industries, LLC, 2006 1 January, 2006 - Rev. 1 Publication Order Number: NUP4102XV6/D NUP4102XV6 ELECTRICAL CHARACTERISTICS (TJ=25C, unless otherwise specified) Parameter Reverse Working Voltage Breakdown Voltage Reverse Leakage Current Clamping Voltage Maximum Peak Pulse Current Capacitance Conditions (Note 2) IT = 1 mA, (Note 3) VRWM = 12 V IPP = 3 A, (8x20 msec Waveform) 8x20 msec waveform VR = 0 V, f=1 MHz (Line to GND) Symbol VRWM VBR IR VC IPP Cj 13 13.6 10 Min Typ Max 12 17.8 100 25 3.0 15 Unit V V nA V A pF 2. TVS devices are normally selected according to the working peak reverse voltage (VRWM), which should be equal or greater than the DC or continuous peak operating voltage level. 3. VBR is measured at pulse test current IT; Pulse Width 1 ms. TYPICAL PERFORMANCE CURVES (TJ = 25C unless otherwise specified) 110 % OF RATED POWER OR IPP 100 90 PERCENT OF IPP 80 70 60 50 40 30 20 10 0 c-t td = IPP/2 WAVEFORM PARAMETERS tr = 8 ms td = 20 ms 110 100 90 80 70 60 50 40 30 20 10 0 0 5 10 15 t, TIME (ms) 20 25 30 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (C) Figure 1. Pulse Waveform Figure 2. Power Derating Curve 24 VCLAMP, CLAMPING VOLTAGE (V) JUNCTION CAPACITANCE (pF) 22 20 18 16 14 12 tP = 10 msec TA = 25C 14 12 10 8 6 4 2 0 0.1 1 IPP, SURGE CURRENT (A) 10 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 VBR, REVERSE VOLTAGE (V) Figure 3. Clamping Voltage vs. Peak Pulse Current (10 msec Square Wave Pulse) Figure 4. Junction Capacitance vs. Reverse Voltage http://onsemi.com 2 NUP4102XV6 PACKAGE DIMENSIONS SOT-563, 6-LEAD CASE 463A-01 ISSUE O NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. MILLIMETERS MIN MAX 1.50 1.70 1.10 1.30 0.50 0.60 0.17 0.27 0.50 BSC 0.08 0.18 0.10 0.30 1.50 1.70 INCHES MIN MAX 0.059 0.067 0.043 0.051 0.020 0.024 0.007 0.011 0.020 BSC 0.003 0.007 0.004 0.012 0.059 0.067 A -X- C K 4 6 5 1 2 3 B -Y- S G D 6 PL 5 0.08 (0.003) J M XY DIM A B C D G J K S ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800-282-9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Phone: 81-3-5773-3850 Email: orderlit@onsemi.com ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. http://onsemi.com 3 NUP4102XV6/D |
Price & Availability of NUP4102XV6T1G
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |